The NSOPA805xQ series is a low voltage (1.8 V to 5.5 V), general purpose, low-power operational amplifiers (op amps) with rail-to-rail input and output swing capabilities. These op amps provide a cost-effective solution for low-voltage operation and high capacitive-load drive are required. The capacitive-load drive of the NSOPA805xQ series is 1nF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads. The robust design of the NSOPA805xQ series simplifies circuit design. The op amps feature unity-gain stability, an integrated RFI and EMI rejection filter, and no-phase reversal in overdrive conditions. Micro-size packages, such as SC70-5, along with industry-standard packages such as SOT23-5L, SOP, MSOP, and TSSOP packages.
Product Features
• Supply voltage range: 1.8V to 5.5V
• Rail-to-rail input and output
• Low input offset voltage: ±0.35 mV (typical)
• Gain-bandwidth product: 5 MHz
• Unity-gain stable
• AEC-Q100 qualified for automotive applications
• Low broadband noise: 16 nV/√Hz (typical)
• Low input bias current: 5 pA (typical)
• Low quiescent current: 360 µA/Ch (typical)
• Internal RFI and EMI filter
• Extended temperature range: –40°C to 125°C
Application
• Sensor signal conditioning
• Power Delivery: UPS/Power module/Solar
• Inverter/Servo/PLC/Motor driver
• Low-side current sensing
• ASIC Input or Output Amplifiers
Functional Block Diagram
For more product information, please contact us.
